Draft Survey vs Shore Scales: Measuring Dry Bulk Cargo
The quantity of dry bulk cargo loaded on a vessel may be determined by draft survey, shore scales or both. Small differences between these methods can affect bills of lading, freight calculations, sale-contract invoices and shortage claims.
Kiev Shipping Ltd helps cargo interests address the contractual quantity basis before fixing and coordinate the relevant figures during voyage execution.
Why the governing quantity matters
A fixture may state freight per metric ton, a minimum or maximum cargo quantity, and deadfreight provisions. The parties should know which measurement establishes the quantity for freight and which figure appears in cargo documents.
If the charter party, sale contract and bill-of-lading instructions use different bases, even a routine measurement difference can become a commercial dispute.
How a draft survey works
A draft survey estimates the vessel’s displacement before and after cargo operations using observed drafts, hydrostatic data and corrections for trim, water density, ballast, freshwater, bunkers, stores and vessel constants.
The difference between the corrected light and loaded conditions provides the calculated cargo quantity. Accuracy depends on reliable observations, stable conditions and complete information about all weights on board.
Factors affecting draft-survey accuracy
Waves, swell, poor visibility, restricted access to draft marks and limited time can make readings difficult. Changes in ballast, bunkers, freshwater or stores between surveys must be recorded correctly.
Water-density sampling, vessel trim, hogging or sagging and the accuracy of tank soundings can also influence the result. Surveyors should document their observations and assumptions.
How shore scales work
Shore scales measure cargo as it passes through terminal weighing equipment or by recording loaded and empty truck or rail weights. The method can provide continuous operational data and detailed parcel records.
Its reliability depends on calibration, maintenance, operating procedure, material loss, moisture changes and control of all cargo movements through the system.
Why figures may differ
Draft survey and shore-scale results measure cargo through different processes and have different tolerances. A discrepancy does not by itself prove physical shortage or measurement error by one party.
Timing matters: rain, dust loss, spillage, residual cargo in equipment and changes in moisture can affect recorded quantities between storage, weighing and final loading.
Quantity on bills of lading
Bill-of-lading figures should follow the agreed documentary procedure and the information the carrier is authorized to record. If the master or owner disputes a shipper’s figure, the issue must be addressed before signing.
Mate’s receipts, quantity certificates and letters of protest may become relevant. Commercial pressure should not result in knowingly inaccurate documents.
Freight and deadfreight calculations
The charter party should identify whether freight is payable on intake quantity, bill-of-lading quantity, shore-scale quantity or another agreed figure. The same clarity is needed for minimum freight, deadfreight and cargo tolerance.
A defined method reduces the risk that one figure is used for freight while another is relied upon for a shortage or performance claim without contractual justification.
Joint surveys and attendance
Owners, charterers, shippers or receivers may appoint independent surveyors to attend opening and closing draft surveys. Joint attendance allows observations, density samples and tank measurements to be recorded contemporaneously.
Any disagreement should be noted at the time rather than raised only after the vessel has sailed and evidence is no longer available.
Documents to preserve
- Initial and final draft-survey reports
- Draft readings and water-density records
- Ballast, bunker and freshwater measurements
- Shore-scale calibration and weight reports
- Mate’s receipts and bills of lading
- Quantity certificates and statements of facts
- Letters of protest and contemporaneous photographs
Agree the procedure before loading
The fixture and operational instructions should state the quantity method, permitted tolerances, responsible surveyors and process for recording disagreement. Sale-contract and charter-party requirements should be checked for consistency.
Early agreement is more effective than trying to reconcile incompatible figures after documentation has been issued.
Dry bulk chartering support
With more than 25 years of experience and over 350 voyages arranged, Kiev Shipping Ltd provides ship chartering, maritime brokerage and commercial coordination for grains, fertilizers, coal, minerals, cement, clinker and other dry bulk cargoes.
For a vessel enquiry, provide the cargo, contractual quantity and tolerance, ports, laycan, stowage factor and proposed measurement basis.
📞 +380674010506 (WhatsApp)
🌐 https://kievshipping.com/

Comments
Post a Comment